Installation requirements and use matters of disc buckle scaffolding

Hubei Wangke Template Co., Ltd. For scaffolding projects, fastener-type scaffolding of ordinary steel pipes was more commonly used before. It is portal scaffolding, and later wheel-buckle steel pipe scaffolding. These scaffolds are time-consuming and labor-intensive when erecting and disassembling, or the safety performance is not high. The disc buckle scaffold has superior performance and has been widely used.

What are the requirements when setting up a scaffolding?

1, the bottom of the frame setting

The bottom of the pole of the disc buckle scaffold should be provided with a pad and an adjustable base, and meet the requirements of the specification; The vertical and horizontal sweeping poles should meet the requirements of the specification.

2, even wall pieces

The tie between the disc buckle scaffolding frame and the building structure should meet the requirements of the specification, and should be from the bottom of the frame from the horizontal rod The connecting wall should be installed at the place, and other reliable measures should be taken to fix it when it is difficult to install it; the frame tie point should be firm and reliable, and the connecting wall should be made of rigid rods.

3. Basic frame requirements

The foundation of the pole should be leveled and compacted according to the requirements of the plan, and drainage measures should be taken to prevent immersion in standing water. The backing plate and base set at the bottom shall meet the specification requirements. The manufacturer's products will be inspected for product quality before leaving the factory.

Disc scaffolding inspection and evaluation assurance items include: construction plan, frame foundation, frame stability, rods Setup, scaffolding, confession and acceptance. General items include: frame protection, rod connection, structural parts materials, and passages. The erection height of disc-buckle scaffolding should not be greater than 24m.

The connection method of disc-buckle scaffolding is the international mainstream scaffolding connection method, and reasonable node design can reach various The force transmission of the rods passes through the node center, and is mainly used in European and American countries and regions. It is an upgraded product of scaffolding. The disc-buckle scaffolding technology is mature, and the connection is firm, the structure is stable, and it is safe and reliable. The following editor has compiled the precautions for the use of disc scaffolding for you, let's take a look.

1. The erector of formwork brackets and disc-shaped scaffolding should be certified.

2. Personnel setting up the bracket should wear helmets, safety belts and non-slip shoes correctly.

3. During the use of formwork brackets and disc buckle scaffolding, the frame structural members shall not be removed without authorization. When dismantling is required, it must be reported to the technical person in charge of the project and the chief management engineer for approval, and the prevention and control measures can be determined before implementation.

4. It is strictly forbidden to carry out excavation operations within the influence of the excavation depth of the formwork bracket and disc-buckle scaffolding foundation.

5. The dismantled bracket components should be safely delivered to the ground, and throwing is strictly prohibited.

6. When performing electric welding on disc scaffolding or template support, fire protection measures and special personnel must be provided guardianship.