Cantilever formwork

The cantilever formwork WA180 has a platform width of 1.8 meters and is mainly used for dams, anchors, retaining walls, tunnels and For underground powerhouses and other constructions that require large-area concrete pouring, there is no need to pass through the wall tie rods. The concrete side pressure is borne by the bracket and embedded parts. The slope can be adjusted. The formwork does not need to be reinforced. It is simple and convenient to use, rapid and economical. Ideal single-sided wall formwork system.

The cantilever formwork WA200 has a platform width of 2.0 meters, suitable for the construction of vertical structures such as bridge piers and high-rise buildings, with lateral pressure on concrete Born by the pull screw and embedded parts, it is light in weight, convenient in application, and rapid in construction. The parts of the main body can be assembled or disassembled freely.

The cantilever formwork WA240 has a platform width of 2.4 meters, similar to WA200, suitable for the construction of vertical structures such as bridge piers and high-rise buildings , The concrete side pressure is borne by the tension screw and the embedded parts. The formwork can be moved back by 650mm as a whole. The support is divided into two types: diagonal brace and truss. The maximum concrete placement height can reach 6 meters.